Here in this article, we will be sharing Samsung Galaxy Tab S7 Plus Stock Firmware (Flash File) so that in case of any emergency you can revert back to / restore to the stock ROM. We will also be tracking all the updates the Samsung Tab S7 Plus gets. We have provided all the required download links for drivers, tools, and firmware also along with installation steps guide for your ease. This guide will be helpful if you brick your device somehow. So do read and follow the steps as given.
Specs Overview – Galaxy Tab S7 Plus
The Galaxy Tab S7 Plus comes equipped with a large 12.4-inch OLED panel with a resolution of 2800 x 1752 and a refresh rate of 120Hz. The display features a 16:10 ratio. Under the hood, there is a Qualcomm Snapdragon 865 Octa-core CPU coupled with Adreno 650 GPU, 6GB RAM, and 128GB internal storage (supports sd card expansion). It runs Android 10 OS with OneUI 2.0 custom skin on top. The Samsung Galaxy Tab S7 features a dual rear camera (13MP main + 5 MP ultra-wide). On the front side, it sports an 8-megapixel camera sensor. The Samsung Galaxy Tab S7+ houses a mammoth 10,090mAh battery and supports up to 45W fast charging but it comes along with 15W charger within the box. Samsung has provided S Pen support with Air Gestures and Microsoft Office integration. It is a 5G enabled device. It also has 4G, Wi-Fi 6, Bluetooth v5.0, GPS/ A-GPS, and a USB Type-C port etc.
About Stock ROM
There are two types of ROMs in Android ecosystem. As I mentioned above one is Stock ROM or the Firmware which comes preinstalled with any Android device and the second one is Custom ROM or commonly known as ROM. Custom ROMs are developed by third-party developers for a specific device. Most of the Custom ROMs are feature-packed and fast which makes them a better alternative to the stock firmware. [su_note note_color=”#c4ffd8″ radius=”2″]
✔ Advantages of Stock Firmware
Flash Stock ROM to unbrick your Galaxy Tab S7 Plus Flash Stock ROM to Fix the bootloop issue. Upgrade and Downgrade Galaxy Tab S7 Plus. Unroot or Fix Bugs on your device. Fix the lag or stutter on Galaxy Tab S7 Plus Revert back to stock firmware will gain device warranty, if under warranty. Fix OTA update issues.
[/su_note] [su_note note_color=”#ffded9″ radius=”2″]
⚠ Disclaimer:
RootMyGalaxy.net is not responsible for any damage happened to your device(s) while following this guide so please proceed at your own risk. However, if you have any queries or issues, you can reach us by commenting. [/su_note]
Pre-Requirements:
Make sure the battery percentage is 60% or above. Install ADB & Fastboot drivers on your computer. Guide > Quickest Way To Install Android ADB and Fastboot (with drivers) on Windows | Install ADB and Fastboot on Mac or Linux Enable the Developer options on your device. Guide > How to Enable Developer Options & USB Debugging on Android Create a Nandroid backup on your device > How To Create & Restore Nandroid Backup On Android Devices You will require a Windows/Mac PC or Laptop and a USB cable. Download all the required files such as firmware, tools, drivers from below. Then proceed to the installation part.
Where and How to Download Galaxy Tab S7 Plus Stock ROM/ Firmware (Update Tracker)
T975XXU1ATI2 September Security Patch (Latest)
OR You can download any Galaxy firmware using Samfirm Tool, Guide: Download Latest Galaxy Firmware using SamFirm Tool Or Using Frija Samsung Firmware Download Tool
Download ODIN Latest Built Download Samsung USB Drivers
Steps to Install Stock Firmware On Galaxy Tab S7 Plus (Unbrick/Unroot/Back To Stock)
Hope this guide is helpful to you and you have successfully installed the Stock Firmware on your Galaxy Tab S7 Plus or Note 10+ device. Feel free to ask in the comments below if you have any queries.
